Panasonic SCEN35, SC-EN33 manual Timers and others, Specifications

Timers and others

Setting the time

This is a 12-hour clock.  Press [CLOCK/TIMER] to set the clock.

Press [2/u] or [1/i] to select the time within 5 seconds. (Press and hold to change the time faster.)

Press [CLOCK/TIMER] again.

g To display the clock when the unit is on	Press [CLOCK/TIMER]
g To check the time when the unit is off	Press [CLOCK/TIMER]
Note
The clock is accurate to within ±60 seconds a month. Readjust if necessary.
Set again after disconnecting the AC power supply cord or power failure.

Sleep timer

The SLEEP timer can turn the unit off after a set time.

Press [SLEEP] to turn the SLEEP function ON/OFF.

• Each time you press the button:

30 MIN 60 MIN 90 MIN 120 MIN OFF (Canceled)

g To check the remaining time Press [SLEEP] once

Note

The play timer and sleep timer can be used together. The sleep timer always has priority. Be sure not to overlap timer settings.

Sound quality

You can choose one of four types of sound quality.

Press [PRESET EQ] to select the sound quality. EQ

• Each time you press the button:

HEAVY	CLEAR	SOFT
(Adds punch to rock)	(Clarifies higher sounds)	(For background music)

EQ OFF (Canceled) VOCAL (Adds gloss to vocals)

Live Virtualizer

You can create a three-dimensional sound field when listening to stereo

Press [SURROUND] to turn the Live Virtualizer ON/OFF.

Note

The actual effect depends on the source played.

➡Page 2 for the position of remote control buttons.

Play timer

You can set the timer to come on at a certain time to wake you up.

Preparation:

Turn the unit on and set the clock.

Prepare the music source you want to listen to; disc, radio or music port source, and set the volume.

Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY Original display

“ON TIME” is displayed. Within 5 seconds, press [2/u] or [1/i] to set the starting time.

Press [CLOCK/TIMER] to confirm.

“OFF TIME” is displayed. Repeat steps 2 and 3 to set the finishing time.

To activate the timer

 Press [zPLAY] to turn on the timer.

Press [^] to turn off the unit.

To	Action
Change the settings	Repeat steps 1 to 4 and 6.
Change the source of volume	 Press [zPLAY] to clear zPLAY indicator
	from the display.
	 Make changes to the source or volume.
	 Perform steps 5 and 6.
Check the settings (when the	Press [CLOCK/TIMER] repeatedly to select
unit is on or in standby mode)	zPLAY.
Cancel	Press [zPLAY] to clear the timer
	indicator from the display.
Note

•The timer will start at the preset time, with the volume increasing gradually to the preset level.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while the timer is functioning, the finish time setting will not be activated.

•When MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)

•When XM Satellite Radio is selected as the source and the timer comes on, the system will play the last XM channel tuned before power off.

Specifications

g AMPLIFIER SECTION

FTC OUTPUT POWER both channel driven simultaneously

10 % total harmonic distortion (THD)

1 kHz SC-EN35 2.8 W per channel

g CD SECTION

Disc played [8 cm (3") or 12 cm (5")]

(1)CD-Audio (CD-DA)

(2)CD-R/RW (CD-DA, MP3)

(3)MP3

Dimensions (W x H x D)

220 mm x 236 mm x 146 mm (8 21/32" x 9 9/32" x 5 3/4")

Mass

With speakers	SC-EN35	3.62 kg (7.98 Ibs)
	SC-EN33
		3.33 kg (7.34 Ibs)

	SC-EN331.8 W per channel
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
1 kHz	SC-EN35	3 W per channel
	SC-EN33	2 W per channel
Output impedance
HEADPHONE		16 Ω to 32 Ω
MUSIC PORT		14 kΩ
DC IN Jack
Terminal		14 V
Phone Jack
Terminal		3.5 mm stereo
Music Port Jack
Terminal		3.5 mm stereo
XM Ready	XM Connect & Play Antenna Only
g TUNER SECTION
Frequency range
FM	87.9 MHz to 107.9 MHz (200 kHz)
	87.5 MHz to 108.0 MHz (100 kHz)
AM	520 kHz to 1710 kHz (10 kHz)

Maintenance

Sampling frequency

CD

MP3 Bit rate MP3 Decoding Pick up Wavelength Laser power

Audio Output (Disc) Number of channels Frequency response Wow and flutter Digital filter

D/A converter

gGENERAL Power supply Power consumption

44.1 kHz

32 kHz, 44.1 kHz, 48 kHz

32 kbps to 384 kbps 16/20/24 bit linear

785 nm

CLASS 1

2 channel

20 Hz to 20 kHz (+1, -2 dB) Below measurement limit

	8
	MASH (1 bit DAC)
	AC 120 V, 60 Hz
SC-EN35	30 W
SC-EN33	16 W

Without speakers	SC-EN35	1.32 kg (2.91 Ibs)
	SC-EN33	1.26 kg (2.78 Ibs)
Operating temperature range		+5 °C to +35 °C
		(+41 °F to +95 °F)
Operating humidity range
5 % to 90 % RH (no condensation)
g SPEAKER SECTION
Type	1 Way, 1 Speaker system
Speaker Unit (s)
Full range Speaker	8 cm (5 1/2") cone type 6 Ω
Impedance		6 Ω
Input power		6 W (MAX)

Dimensions (W x H x D)

121 mm x 236 mm x 146 mm (4 3/4" x 9 9/32" x 5 3/4")

Power consumption in standby mode:2.0 W (approx.)

Notes:

Specifications are subject to change without notice. Mass and dimensions are approximate.

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

6• Before using chemically treated cloth, read the instructions that came with the cloth

Care of the CD lens

•Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty.

Recommended product: Lens cleaner kit (part no. SZZP1038C). 7

carefully. • Do not use the lens cleaner of the CD type.