Preparation
Setup | 3 Setting date and time |
|
When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
¬Rotate the mode dial to select or .
1 Select the menu. (l 20)
[BASIC] # [CLOCK SET] # [YES]
∫Changing the date format Select the menu. (l 20)
[SETUP] # [DATE FORMAT] # desired display style
2 Select the date or time, then adjust the desired value with the joystick.
≥The year will change as follows: 2000, 2001, ..., 2099, 2000, ...
≥The
≥[ ] appears on the right top of the screen when [SET WORLD TIME] (l 24) is set to
[HOME], while [ ] appears when it is set to [DESTINATION].
3 Press the joystick to enter the selection.
≥The clock function starts at [00] seconds when the joystick is pressed.
Display style | Screen display |
[Y/M/D] | 2009.11.15 |
|
|
[M/D/Y] | 11.15.2009 |
|
|
[D/M/Y] | 15.11.2009 |
|
|
|
|
≥To set summer time, select summer time in [HOME] for [SET WORLD TIME] after setting the clock.
≥The date and time function is driven by a built- in lithium battery.
≥If the time display is [-
To recharge the
4 Press the MENU button to finish the setting.
≥Check the date and time displayed.
∫Changing the date and time display mode
Select the menu. (l 20)
[SETUP] # [DATE/TIME] # desired display style
[DATE] [D/T] [OFF]
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.
15.11.2009
15.11.2009 12:34
23
LSQT1522