Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1Select the desired track.

2

Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
Select this setting to boost the low frequency response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your headphones/earphones while rid-
ing on the train, or to reduce fatigue when listening for a
long period of time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
4
Other Play MethodsThe letters such as Din the various illustrations refer to the descriptions in the “Location of Controls” section.Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`)|
All the tracks on the disc are repeated. |
v|
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v|
Random repeat (RANDOM `)|
The tracks play repeatedly in random |
order. |
v|
Cancel (no indicator is shown) --------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `M)(------------]
One track is repeated. |
v|
Memory repeat (`M) |
The programmed tracks are repeated. |
v|
Cancel (M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The resume function does not work when random or
random repeat are on.
≥The mode is canceled when you disconnect the power
source.
D
C
Location of Controls
Portable CD player A
AStop/operation off button
(∫)
BDisplay
CPlay/pause button (1/;)
DSkip/search buttons
(:, 9)
EHeadphone volume control
buttons (j, VOL, i)
FMode button (MODE)
GMemory/recall button
(MEMORY, RECALL)
HEQ button (EQ)
IOpen switch (OPEN1)
JHandstrap hole
KDC IN jack (K DCIN 4.5 V)
LHold switch (HOLD)
MHeadphone jack (Ë)
NHole for car mounting base
Wired remote control B
ASkip/search buttons
(:, 9)
BPlay/stop/operation off button
(∫/1)
CVolume control buttons
(j,VOL,i)
DHeadphone jack/ earphone
jack
EClip
FHold switch (HOLD)
GEQ button (EQ)
HPlug

A

B

VOL
MEMORY
RECALL
EQ
MODE
OPEN
HOLD
Ë
IH
EQ HOLD
VOL
ABCFGDE
HOLD
Ë
DC IN 4.5V
KL MBACEDFGHJN
Side panel of the unit
F
MODE
H
EQ
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1Select the desired track.
2Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3Repeat steps 1 and 2 to program all
the desired tracks.

4

∫To program the same track in the se-
quence more than once
∫After step 2, press [MEMORY, RECALL] the desired
number of times.
∫If “'” is displayed
∫No more tracks can be programmed.
∫To confirm the contents of the program
∫Press [MEMORY, RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
∫To delete the entire programmed se-
quence
∫Press [∫].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
D
G
MEMORY
RECALL
C
Back panel of the unit