Braun IRT3020 Temperature taking hints, Care and cleaning, Trouble-shooting, Situation Solution

Models: IRT3020

1 25
Download 25 pages 34.8 Kb
Page 5
Image 5

5. For the next measurement, remove the used lens filter and put on a new, clean lens filter. Clear the display by pushing the «start» button once. Fit the probe snugly into the ear canal, then push the «start» button.

The Braun ThermoScan ear thermometer turns off automatically after 60 seconds of inactivity.

Temperature taking hints

A measurement taken in the right ear may differ from the measurement taken in the left ear. Therefore, always take the temperature in the same ear.

The ear must be free from obstructions or excess earwax build-up to take an accurate reading.

External factors may influence ear tempera- tures, including when an individual has:

been lying on one ear or the other

had their ears covered

been exposed to very hot or very cold temperatures, or

been recently swimming or bathing.

In these cases, remove the individual from the situation and wait 20 minutes prior to taking a temperature.

If ear drops or other ear medications have been placed in the ear canal of one ear, take the temperature in the untreated ear.

Care and cleaning

The probe tip is the most delicate part of the thermometer. It has to be clean and intact to ensure accurate readings.

If the thermometer is accidentally used without a lens filter, clean the probe tip as follows:

Very gently wipe the surface with a cotton swab or soft cloth moistened with alcohol.

Once the alcohol has dried completely, a new lens filter can be put on and a temperature measure- ment taken. If the probe tip is damaged, contact Braun.

Use a soft, dry cloth to clean the thermometer display and product exterior. Do not use abrasive cleaners. Never submerge this thermometer in water or any other liquid.

Store the thermometer and lens filters in a dry location free from dust and contamination and away from direct sunlight.

Additional lens filters (LF 40) are available at most stores selling Braun ThermoScan.

Trouble-shooting

Situation

Solution

 

 

 

 

 

 

No lens filter

Attach new, clean lens

 

 

 

 

is attached.

filter.

 

 

 

 

 

 

 

 

 

 

Ambient

Allow the thermometer

 

 

 

 

temperature

to remain for 30 min-

 

 

is not within

utes in a room where

 

 

the allowed

the temperature is be-

 

 

operating

tween 10 and 40 °C

 

 

range

or 50 and 104 °F.

 

 

(10 – 40 °C or

 

 

 

50 – 104 °F).

 

 

 

 

 

5

Page 5
Image 5
Braun IRT3020 manual Temperature taking hints, Care and cleaning, Trouble-shooting, Situation Solution