M
FM
10710
1
FM
0710
1
Press and hold to scan the stations rapidly.
TUNED appears when tuned.
When M is displayed, press [TUNING
MODE] to cancel it.
Store the frequencies of up to 30 stations; 20 FM and 10 AM.
1Slide [HOLD1] in the opposite direction to the arrow to cancel.
2Press [RADIO/BAND] to turn the tuner on and change the band.
3Press [TUNING MODE] to display M.
4Press [RECALL, MEMORY].
5Do each of the following within 10 seconds.
1Press [:,s] or [9,r] to select the frequency.
1Press and hold to scan the stations rapidly.
2Press [RECALL, MEMORY].
3Press [:,s] or [9,r] to select the memory number.
1Press and hold to change incrementally.
4Press [RECALL, MEMORY] to confirm the setting.
Change the frequency step according to the area.
1 Press [RADIO/BAND] to switch on the power.
2 Press and hold [RADIO/BAND] until the step appears.
3 Do each of the following within 10 seconds.
1Press [:,s] or [9,r] to select the step.
1Each time you press [:,j] or [9,i]
2Press and hold [RECALL, MEMORY] until the frequency appears to
confirm the step.
To return to the previous frequency step
Repeat the above procedure.
Changing the step erases the stations you stored in memory.
S-XBS S-XBSr
6RQT8256
Button control guide (Listening to the Radio)
Set to MONO when there is noise during FM
reception.
Sound becomes monaural, but noise is reduced.

Each time you press [MONO/ST,

FM MODE]

No display
(stereo)
MONO
U0.2 U0.1 E
FM 0.2 MHz,
AM 10 kHz
(original setting)
FM 0.1 MHz,
AM 10 kHz
FM 0.05 MHz,
AM 9 kHz
FM
U02

When using overseas

M
FM
19800
M
FM
10600
1
M
FM
10710
1
Set to CITY if reception is poor or if there
is interference from another station.

Each time you press and hold

[%CITY/NOR]

Radio on/

Change

band

RADIO/BAND
Press.

Select the

station

9,i
(Forward)
:,j
(Backward)
Press.
No display
(canceled)

To obtain good reception

AM
Try various directions to obtain
optimum reception.
FM
The headphone cord is also the FM antenna, so extend it instead
of leaving it coiled.

Receive

an FM

broadcast

clearly

%CITY/NOR

Select

stereo or

monaural

FM

MONO/ST,
FM MODE
Boosts the
bass
No display
(canceled)
Enhanced
S-XBS

Sound

quality EQ

Each time you press [EQ]

,OPR OFF

Turn off

Storing stations in memory

Listening to a memorized station

Erasing a memorized station

1Perform steps 1 to 3 for Storing stations in memory (above).
2Press [:,s] or [9,r] to select the memorized station.
Press and hold to change incrementally.
TUNED appears when tuned.
3Adjust the volume.
1Perform steps 1 to 3 for Storing stations in memory (left).
2Press [:,s] or [9,r] to select the memorized station to
be erased.
Press and hold to change incrementally.
3Press [RECALL, MEMORY].
The frequency number flashes.
4Do each of the following within 10 seconds.
1Press and hold [RECALL, MEMORY] until - - - - flashes.
2Press [RECALL, MEMORY].
M
FM
1- - - -
i,VOL
(Increase)
j,VOL
(Decrease)

Volume

control

(0 to 25)

Press.

HOLD

(Function lock)
HOLD 1Slide in direction of arrow.
(Slide in opposite direction to cancel.)

Press.

Press again to change the band.
Each time you press the button:
FM () AM
The effect may differ with different kinds of
music.