Panasonic SL-SV590 operating instructions Display, Hold Function lock, Resume function

Operating Instructions

Portable CD Player

Model No.

SL-SV590

Dear Customer

Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

P PC ￿

HOLD (Function lock)

The hold function stops the buttons from being operated. By keeping the hold function on, you can stop the power from being switched on, play from being stopped and other operations from being done by mistake.

Resume function

Play resumes from where last stopped. [The resume function is canceled if you open the lid while stopped (while the power is ON). The resume function is also canceled when the disc is changed.]

Discs that can be played

CD-R/CD-RW
		WMA
Commercially CD-DA	MP3	WMA cannot
available music CD		be played
(CD-DA)

Panasonic Consumer Electronics Company,

Division of Panasonic Corporation of North America

One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com

RQT8542-P

F1205ST0

Panasonic Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca ￿￿2005 Matsushita Electric Industrial Co., Ltd.

Printed in China

Before requesting service, make the following checks. If you are in doubt about some of the check points, or Troubleshooting guide if the solutions indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on

page 3 if you reside in the U.S.A., or refer to the “Product information” on page 2 if you reside in Canada.

No play.	￿HOLD is on, stopping buttons from being operated.
	Cancel HOLD (￿page 4).
	￿The batteries may be drained (￿page 4).
	￿The disc isn’t correctly set.
	￿The disc is scratched or dirty. (Tracks may be skipped
	particularly with MP3 discs.)
	￿There is moisture on the lens. Wait for about an hour
	and then try again.
	￿The lens is dirty: clean it with a blower (recommended
	product: SZZP1038C). You cannot use a CD type lens
	cleaner. If the lens gets marked with fingerprints, gently
	wipe them off with a cotton swab.
	￿Remove the plug and reinsert it as fully as possible.
	￿The unit may not read a track properly if shaken
	strongly during disc reading.
	￿If there is no data between sessions on a multi-session
	disc, play may not be possible.
	￿If there is a large amount of JPEG data etc. within an
	MP3 file, sound may be muted and play may not be
	possible.
	￿If the disc contains data with different formats, sound
	may be muted and play may not be possible.
	￿If a CD-ROM format disc contains MP3 and other files,
	only the MP3 files will be playable.

No sound or there is a ￿Ensure the plugs are inserted firmly.

lot of noise.	￿Wipe the plugs with a clean cloth.
	￿The disc is scratched or dirty.
	￿Sound may be interrupted or noise may occur if the
	recording quality of the disc (CD-R/CD-RW) is poor.
	￿The elapsed play time disappears and sound is
	interrupted if bumps continue repeatedly.
	￿Increase separation between the unit and mobile
	phones. This unit may receive radio interference
	caused by the mobile phones during use.

Disc rotation stops Disc rotation stops and starts to save power. and starts during play.

Operation sounds are There is some sound heard when a disc is being heard from the unit. accessed or disc rotation starts.

Play doesn’t resume	￿This doesn’t work during random play.
from the last point	￿It may not work correctly under some conditions.
stopped.
Play doesn’t start from	￿Random play modes may be on (￿page 5).
the first track.	￿The resume function (￿above) is operating. The
	resume function is canceled if you open the lid while
	stopped (while the power is ON).
Cannot search through	You cannot search through a disc with MP3 files.
tracks.
Cannot specify point A	You may not be able to specify point A or B at the end of
or B.	a disc.
Cannot change the	If [￿] or [￿] is pressed before [MEMO] you
anti-skip mode.	cannot change the mode.
Digital Re-master	Depending on the type of MP3 disc recording, the effect
does not work.	may not appear.
Cannot skip albums.	You cannot skip from the last to first album, or vice
	versa, during play.
Radio reception is	Keep the unit away from televisions and other tuners.
noisy.
Cannot listen to AM.	This unit only supports an FM tuner.
The battery indicator	The indicator may not appear correctly under certain
fails to appear or is	conditions.
incorrect.
The unit stops	Remove the batteries then insert them again.
working.

Display

￿HOLD is on, stopping buttons from being operated. Cancel HOLD (￿page 4).

￿￿You haven’t inserted a disc or it isn’t inserted correctly. ￿You have inserted a disc this unit cannot play.

￿The disc lid is open.

￿The program already contains 20 tracks.

￿ Reading MP3 files.

1