Panasonic SL-SV590 operating instructions Specifications, Product Service

Models: SL-SV590

1 6
Download 6 pages 7.88 Kb
Page 2
Image 2

Specifications

Play time

Using on a flat stable surface at 25 ￿C (77 ￿F), all sound quality effects are canceled, Hold is on, Anti-skip is on POS 1 (CD-DA) and recommended bit rate (MP3: 128 kbps). Play times are in hours and approximate.

￿The play time may be less depending on the operating conditions. ￿Play time will be considerably reduced when playing CD-RW.

Batteries used

MP3

CD-DA

Radio

(FM band)

 

 

 

 

 

 

 

2 alkaline batteries (LR6)

75

33

33

 

 

 

 

Caution

Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions.

￿Batteries

￿Do not peel off the covering on the batteries and do not use if the covering has been peeled off.

￿Align the poles ￿ and ￿ correctly when inserting the batteries. ￿Do not mix different types of batteries or old and new batteries.

￿Remove the batteries if you do not intend to use the unit for a long time.

￿Do not throw into a fire, short-circuit, disassemble, or subject to excessive heat. ￿Do not attempt to recharge dry cell batteries.

￿When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are placed together with them. Contact with metal may cause short-circuiting which can cause a

CD Section

￿Audio (CD-DA)

Sampling frequency: 44.1 kHz No. of channels:

2 (left and right, stereo) Frequency response:

20 Hz to 20,000 Hz (￿0.5 dB to ￿7.0 dB)

Headphone output level:

RMS max. 6.5 mW￿6.5 mW/ 16 ￿ (adjustable)

￿Pickup

 

Light source:

Semiconductor laser

Wavelength:

795 nm

￿MP3

 

Supported bit rates (Supports variable bit rates):

32 kbps to 320 kbps

(128 kbps is recommended) Supported sampling frequency:

48 kHz/44.1 kHz/32 kHz

Maximum number of items

 

(total no. of albums and tracks):

999

(total no. of albums):

500

Maximum album levels:

100

Radio section

￿Frequency Radio frequency:

FM; 87.90 MHz to 107.90 MHz (0.2 MHz steps)

87.50MHz to 108.00 MHz (0.1 MHz/0.05 MHz steps)

General

Dimensions (W￿H￿D):

138.6mm￿24.4 mm￿138.6 mm

(514/32￿ ￿ 31/32￿ ￿ 514/32￿)

Mass: 217 g (7.6 oz.) (with batteries) 170 g (6.0 oz.) (without batteries)

Operational temperature range:

0 ￿C to 40 ￿C (32 ￿F to 104 ￿F)

Note:

Specifications are subject to change without notice.

Mass and dimensions are approximate.

fire.

￿CDs

￿Do not use irregularly shaped CDs. ￿Do not use non-specification CDs.

￿Do not use CDs printed with label printers available on the market.

￿Do not use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers.

￿Listening Caution

Do not play your headphones or earphones at a high volume. Hearing experts advise against continuous extended play.

If you experience a ringing in your ears, reduce volume or discontinue use.

Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.

You should use extreme caution or temporarily discontinue use in potentially hazardous situations.

Even if your headphones or earphones are the open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you can’t hear what’s around you.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level:

￿Start your volume control at a low setting.

￿Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level:

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused

for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

Marking sign is located on bottom of the unit.

￿Leave it there.

Product Service

1.Damage requiring service—The unit should be serviced by qualified service personnel if:

(a)The AC power supply cord or AC adaptor has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped or the cabinet damaged.

2.Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3.Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4.Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Product information

For product information or assistance with product operation: In the U.S.A., refer to “Customer Services Directory” on page 3.

In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ￿Reorient or relocate the receiving antenna.

￿Increase the separation between the equipment and receiver.

￿Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

￿Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:

Panasonic Corporation of North America One Panasonic Way

Secaucus, NJ 07094

Telephone No.: 1-800-211-7262

MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.

2

Page 2
Image 2
Panasonic SL-SV590 operating instructions Specifications, Product Service