Other Play Methods
The letters such as A in the various illustrations refer to the descriptions in the following “Location of Controls” section.
Skip play
The disc plays from the specific track through to the end, then play stops automatically.
Preparation: Put unit in stop mode.
1 | MODE | NORMAL |
P | RESUME | RANDOM |
2 Select the desired track.
65
C : 9
3
F1;
For your reference:
≥If the play mode selector [MODE] is put in the [RESUME] position, the
≥If power is cut off near the end of a track (off mode), playback may resume from the beginning of the next track in some cases.
≥If the unit is powered off while a disc was playing and then a new disc is inserted, play will begin from the middle of the new disc because the unit remembers the position where play stopped on the previous disc.
Program play
Up to 24 tracks can be entered in the programmed se- quence.
Preparation: Put unit in stop mode.
1 | MODE NORMAL |
PRESUMERANDOM
Repeat function
Press while disc is playing or when unit is in stop mode.
`
H
The setting is switched in the sequence indicated below each time [`] is pressed.
] | |
One track is repeated. | |
; | |
All the tracks on the disc are repeated. | |
; | |
Cancel (No indicator is shown) | } |
For your reference:
If “ALL `” is selected during program play, only the tracks in the program are repeated.
(The indication “ALL” is not displayed.)
Random play
1 | MODE | NORMAL |
P | RESUME | RANDOM |
2
F1;
Release | MODE | NORMAL |
P | RESUME | RANDOM |
For your reference:
≥It is also possible to press [9] while unit is in stop mode to change the first track to be played. (All tracks are played eventually, regardless of which is played first.)
≥Program play is not possible in random mode.
Resume play
This function allows you to listen from the beginning of the track where play stopped because the unit was powered off (or switched to stop mode). It is useful when listening to CDs in the car, etc.
MODE NORMAL
PRESUMERANDOM
Release
MODE NORMAL
PRESUMERANDOM
2 Select the desired track.
65
C : 9
3 Register in sequence.
(The indication “M” and the programmed se- quence appear on the display panel.)
MEMORY/
RECALL
D
4 Repeat steps 2 and 3 to program all the desired tracks.
5
F1;
∫To program the same track in the sequence more than once
After step 3, press [MEMORY/RECALL] the desired number of times.
∫If “'” is displayed
No more tracks can be programmed.
∫ To confirm the contents of the programmed sequence
Press [MEMORY/RECALL] while the disc is playing. (The number of the programmed tracks appear on the display panel in sequence.)
∫To delete the entire programmed sequence
Press [∫, OPR OFF].
Changing the sound quality
Press while disc is playing or when unit is in stop mode.
EQ
E
The setting is switched in the sequence indicated below each time [EQ] is pressed.
^
Select this setting to boost the
VMSS | : | VMSS unit |
Boosts the low frequency range.
The VMSS unit of the included headphones vibrate, making the
sound seem vigorous.
Raising the volume makes the VMSS effect intensify.
Note.
≥The effect may be reduced with some sources.
≥The best effect is obtained by allowing the VMSS unit to directly contact the neck. Depending on how the unit is worn, the effect can be reduced.
≥If you experience a ringing or discomfort in your ears while listening in VMSS mode, reduce volume or turn the VMSS mode OFF.
Location of Controls
A B C D E F G H |
| ||
|
|
| O |
|
|
| P |
|
|
| Back panel of |
N A | M | L K JI | Q the unit |
4 |
|
|
|
A Dual lock (OPEN) | J Out jack (OUT) |
B Stop/operation off button | K Hold switch (HOLD) |
(∫, OPR OFF) | L Headphone jack (Ë) |
C Skip/search buttons | M Headphone volume control |
(:, 9 6, 5) | (VOLUME) |
D Memory/recall button | N Display |
(MEMORY/RECALL) | O CD release button (PUSH) |
E EQ button (EQ) | P Play mode selector (MODE) |
F Play/pause button (1;) | Q Hole for car mounting base |
G
I DC IN jack (DC IN 4.5 V K)