Panasonic SL-SX392C, SL-SX391C operating instructions Other Play Methods, Anti-Skip System

Other Play Methods

The letters such as B in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).

Skip play

The disc plays from the specified track through to the end, then play stops automatically.

Preparation: Put unit in stop mode.

1 Select the desired track.

B

2

H

Changing the sound quality

Press during play or stop mode.

EQ

D

The setting switches in the sequence indicated below each time [EQ] is pressed.

S-XBS>TRAIN>Cancel (no indicator is shown)

^==========b

Program play

Up to 24 tracks can be entered in the programmed se- quence.

Preparation: Put unit in stop mode.

1 Select the desired track.

B

2 Register in sequence.

(The indication “M” and the programmed se- quence appear on the display.)

MEMORY/RECALL

G

3 Repeat steps 1 and 2 to program all the desired tracks.

4

H

∫To program the same track in the se- quence more than once

∫After step 2, press [MEMORY/RECALL] desired number of times.

Repeat play/Random play

Press during play or stop mode.

MODE

F

The setting is switched in the sequence indicated below each time [MODE] is pressed.

1-track repeat (1 `)( ----------------	]
One track is repeated.
v
All-track repeat (`)

All the tracks on the disc are repeated.

v

Random (RANDOM)

The tracks play once each in random

order and then play stops.

v

Random repeat (RANDOM `)

The tracks play repeatedly in random
order.
v
Cancel (no indicator is shown) --------------	}

When pressed during program play

The setting is switched in the sequence indicated below each time [MODE] is pressed.

1-track repeat (1 `M)(------------	]
One track is repeated.
v
Memory repeat (`M)

The programmed tracks are repeated.

v
Cancel (M) -------------------------------------------	}

S-XBS:

Select this setting to boost the low-range response.

TRAIN:

Select this setting to avoid annoying other passengers with noise from your headphones/earphones while rid- ing on the train, or to reduce fatigue when listening for a long period of time.

Note!

The setting returns to S-XBS when you disconnect the power source.

Anti-Skip System

This system deals with skipping in a variety of ways:

≥An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit.

≥A recovery system immediately returns the laser pick- up to its original position if it is knocked off the track by a strong shock.

≥An anti skip memory (max. 48seconds) fills in interrup- tions caused by bumps and vibrations.

The anti-skip system works automatically while the system is on and cannot be canceled.

∫If “'” is displayed

∫No more tracks can be programmed.

∫To confirm the contents of the program

∫Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on the display in sequence.)

∫To delete the entire programmed se- quence

∫Press [∫].

Note!

The repeat and random play modes are canceled after steps 1 and 2.

When bumps continue repeatedly

The elapsed playing time disappears and sound is inter- rupted.

		S-XBS TRAIN
	RANDOM 1 M
E	C	VOL

Note!

≥You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played.

≥You cannot select random play or random repeat play during program play.

≥The resume function does not work when random or random repeat are on.

≥The mode is canceled when you disconnect the power source.

Note!

≥While the system is on, the disc rotates at a higher rate than usual in collecting extra audio data. This could result in a slight increase in disc rotation noise.

≥The anti-skip memory compresses digital signals.

4