Symptom

Remedy

 

 

 

 

The ENR SYNCHRO

• The tape has reached its end. Insert a new tape and press ENR

 

button turns off while

SYNCHRO again.

Recording

recording or does not go

 

back to recording standby

 

mode.

 

 

 

The Synchronized

• The connected equipment was not turned off.

Recording function does not

Turn off the connected equipment and press ENR SYNCHRO

Synchronized

work.

again.

 

• There was a power failure. Press ENR SYNCHRO again.

 

 

The programme recorded

• If the settings for timer recordings and Synchronized Recording

with the Synchronized

overlap, the programme that starts first has priority and the second

Recording function is

programme starts recording only after the first programme has

 

 

incomplete.

finished.

 

 

• There was a power failure. Press ENR SYNCHRO again.

 

 

 

 

You cannot set the channel

• Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in

 

as the Canal Plus in the

the OPTIONS-2 menu is set to DECODEUR (see page 79).

 

REGLAGE DES CHAINES

 

 

menu.

 

Plus

 

 

You cannot watch the Canal

• Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in

Plus programme when the

the OPTIONS-2 menu is set to DEOCEUR (see page 79).

Canal

VCR is in standby mode.

• Make sure the Canal Plus Scart cable is plugged securely.

 

 

The Canal Plus programme

• Make sure the Canal Plus Scart cable is plugged securely.

 

is always recorded

• Check that DECODEUR/LIGNE3 (or DECODEUR/LIGNE2) in

 

scrambled.

the OPTIONS-2 menu is set to DECODEUR (see page 79).

 

 

• Check that this channel is set as Canal Plus in the REGLAGE DES

 

 

CHAINES menu (see page 37).

 

 

 

88Troubleshooting