![](/images/new-backgrounds/1224386/22438613x1.webp)
Preparation for Wall-hanging
Before mounting the TV on the wall, you must remove the
1 | Disconnect all the cables from the TV. | A |
| ||
2 | Remove the |
|
| A Remove four screws |
|
| B Pull out the |
|
|
| B |
|
|
|
Quick Start Guide
Foam mat or thick |
|
|
soft cloth | A | A |
WARNING
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Any damage resulting from not having a professional installer mount the unit will void your unit’s warranty. Always be sure to ask a qualified technician to carry out
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not mount this LCD Television directly below ceiling lights (such as spotlights, floodlights, or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Accessories/Optional Accessory
Adjust the LCD panel to your desired angle.
b
a
(View from above)
Note
When this hole is aligned with the center of the groove, the pedestal
15° will be positioned at the
center of its rotation.
15°
a:16.1 ” (408 mm)
b:12.0 ” (304 mm)
a:18.3 ” (464 mm)
b:15.0 ” (381 mm)
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
Reference of connection
Antenna terminal
Firmly tighten by hand.
Pin terminals | HDMI terminal |
red blue green green
Match colors of plugs and terminals. | Insert firmly. |
Insert firmly. |
|
7