Panasonic TC-50PU54 owner manual Attaching the pedestal to TV, Removing the pedestal from the TV

Attaching the pedestal to TV

■Assembling the pedestal

Fix securely with assembly screws A (Total 4 screws).

Tighten screws firmly.

A

Pole

R

LPole

Front

Base

■Set-up

Tighten assembly screws B (total 4 screws) loosely at first, then tighten them firmly to fix securely.

	Rear side
Arrow	B
mark

Hole for pedestal installation

PolePole

	Base
(Image)	Work on a flat surface

Accessories

Assembly screws (4 of each)

A

XYN5+F18FN

size (M5 × 18) (Silver)

B

THEL080N

size (M5 × 30) (Black)

Poles (2)

(L) TBLA3680

(R) TBLA3679

L R

L or R is printed at the bottom of the poles.

Base (1)

TBL5ZX0337

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

Remove the assembly screws from the TV.

Lift the TV from the pedestal.

Remove the assembly screws from the pole.

Warning

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

8