Auto channel setup (ANT/Cable setup)
Select the connected Antenna in terminal
ANT/Cable setup |
| Step 3 of 6 |
| Not used: Go to |
Cable | Antenna | Not used |
| (Label inputs) |
|
|
| select | |
|
| Cable In |
| |
|
| ANTENNA |
|
|
|
| ANTENNA | OK |
|
|
| Cable In |
|
Select | OK | Select “Not used” when viewing TV via |
RETURN | Satellite receiver or Cable box. Note: Select | |
| “Cable” when viewing via Cable DTA Box. |
Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. 
Typical when a Cable/Satellite box is connected to a TV input.
Prevents accidental tuning to an unavailable signal.
Select “Start”
Auto program | Step 4 of 6 |
Skip: Go to 
Quick Guide
| Start |
| Skip |
| |
| OK | Start scanning for channels via the TV’s | |||
Select | RETURN | ||||
channels via Satellite receiver or Cable box. | |||||
| |||||
select
OK
(Label inputs)
Start First
Press to return to the previous screen
Start scanning the channels
(Available channels are automatically set.)
Auto program
Progress | 8% |
Number of analog channels | 10 |
Number of digital channels | 0 |
Press RETURN to quit
RETURN
Complete the Auto program setup
Completion message is displayed when the Auto program scan is successfully completed.
Auto program | OK | If there is no available | |
Number of analog channels | channel, return to | - | |
10 | (ANT/ Cable setup). |
| |
Number of digital channels | 0 |
| |
Auto program completed. |
| “Not used” will be selected. | |
Press OK to continue.
OK
RETURN
Operation of the EXIT button during “First time setup”
Press the button once to display confirmation screen. Press again to close confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup? | Yes | Exit “First time setup” | ||
|
|
| No | Return to the original screen. |
Yes |
| No | ||
To repeat the First Time Setup, select “First time setup” in the Setup Menu.
Time Setup
13
