9
Accessories
Assembly screws
Bracket (1) Cover (1) Base (1)
TBL5ZA30091 TBL5ZB30091
TBL5ZX0252 (47 ”)
TBL5ZX0251 (55 ”)
XSS5+15FNK
(black)
size (M5 x 15) (4)
XYN4+F10FJK
(black)
size (M4 x 10) (4)
XYN4+F10FNK
(black)
size (M4 x 10) (2)
(included with Cover)
■Preparation for assembly ■Assembling the pedestal Unpack the pedestal and the TV, turn them so that their
front surfaces face down, and put them on a blanket or
such other cloth spread out on a workbench or desk.
Turn the front side of package to the workbench when
unpacking the TV.
Choose a stable workbench that is larger than the TV
and use a clean blanket or cloth that has no dirt or
foreign matter on it.
Do not hold the LCD panel when holding the TV.
Be careful not to scratch or damage the TV.
Attach the Bracket to the protrusion of Neck.
Make sure that the bracket is anchored before fixing the
screws.
Fix securely with assembly screws (4 screws)
A
Bracket
Front Base
Hold the
bracket
not to fall over
Protrusion of Neck (top)
■Set-up
Attach the pedestal
Back of the TV
Align the three tabs
on the bracket with
the grooves on the
back of the TV and
insert them.
Check that the center
tab is in the hole, and
then slide in the bracket
so that the arrow (↓) on
the back of the TV is
aligned with the arrow
(↑) on the bracket.
Tighten assembly
screws (total 4
screws) loosely at
first, then tighten them
firmly to fix securely.
tab
Attach the bracket cover
Attach the bracket cover and fix securely
with assembly screw (total 2 screws).
Tighten screws firmly.
Set the pedestal
●As shown in the figure, two people should hold the specified portions of
the TV, raise and set up the TV.
Hold here
Cover
Back of the TV
Attaching the pedestal to TV
Two people are always required for attachment.