Set Sleep Timer
The TV automatically goes into Standby after the selected period.
■Press SLEEP repeatedly until the desired time appears.
SLEEP
30
• Off/15/30/60/90 (minutes)
Note
•It is also possible to set the time from “Sleep Timer” in the “Timer” menu (p. 29).
•To cancel, set to “Off” or turn off the TV.
•To display the remaining time Information banner (p. 14)
•When the remaining time is within 3 minutes, the remaining time will be displayed on screen.
Watching content from external devices
With the connected equipment turned On
Display the Input select menu
Select the input mode
Input select
1 |
| ANT/Cable In | Not used |
|
|
|
|
|
|
|
|
2 |
| HDMI 1 | GAME |
|
|
|
|
3HDMI 2
4Comp./Video
(example)
or
select
enter 
Input label
You can also press the corresponding NUMBER button or press INPUT repeatedly to cycle through the available inputs. If you are unsure which input to select, wait 2 seconds between each selection.
●For your convenience, your can edit the inputs with labels that are easy to remember.
●During the selection, if no action is taken for several seconds, the “Input select” menu disappears.
|
| Terminal | Set ANT/Cable in (p. 27) |
HDMI 1 |
| ||
GAME |
| Label | Enable Inputs |
|
| ||
|
|
| |
| (example) | Edit labels | |
| Input labels | ||
|
|
| (Press MENU |
Operate the connected equipment directly or use the remote control supplied with the equipment
Note
●For details, see the manual for the connected equipment.
16
