Panasonic TC-P55GT31 owner manual How to Use Menu Functions

Settings Items Item Description

•Some menus are grayed out depending on the input signal or condition. (e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.)

Aspect	Screen format	FULL/H-FILL/	Changes the format (aspect ratio).
adjustments		JUST/4:3/ZOOM	Lets you choose the aspect depending on the format of
			received signal. (p. 58)
	HD size	Size 1/Size 2	Selects between 95 % (Size 1) or 100 % (Size 2) for the
			scanning area with High-definition signal.
			Select “Size 1” if noise is generated on the edges of the screen.
			● Size 1: Selected item for “HD size”. Scanning 95 %
			● Size 2: Selected item for “HD size”. Scanning 100 %
	H size	Size 1/Size 2	Adjusts the horizontal display range to reduce noise of both side
			edges of an image.
			Size 2: Adjusts the image size according to the aspect mode to
			reduce noise. (p. 58)
	Zoom	Adjusts vertical alignment and size when aspect setting is “ZOOM”.
	adjustments
PC adjustments	Reset to defaults	Resets PC adjustments.
	Sync	H & V	The H and V sync signals are input from the HD/VD connector. (p. 61)
		On green	Uses a synchronized signal on the Video G signal, which is
			input from the G connector. (p. 61)
	Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
	H-position	Adjusts the horizontal position.
	V-position	Adjusts the vertical position.
	Clock phase	Alleviates the problem if the whole picture appears to flicker or is blurred.
		First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
		so that a clear picture appears.
		● It may not be possible to display a clear picture due to poor input signals.
	Input	Switches to wide display.
	resolution	● VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
		WXGA (1,280×768 pixels)
		● Options change depending on signals
	H-frequency	Displays the H (Horizontal)/V (Vertical) frequencies.
	V-frequency	Display range
		Horizontal:15 - 110 kHz
		Vertical: 48 - 120 Hz
HDMI settings	HDMI/DVI RGB	Auto/	Prevents the blown out highlights and blocked up shadows when
	range (HDMI 1-4)	Standard	a wide-range signal is received. Selects between standard RGB
		(16-235)/	range (16-235 bits) or non-compliance (0-255 bits).
			Auto: Switches the RGB range (Standard (16-235)/
		Nonstandard
			Nonstandard) depending on the HDMI signal information.
	Contents type	Off/Auto/Photo/	Sets content type to each HDMI input.
	(HDMI 1-4)	Graphics	Auto: Switches content type automatically depending on the

HDMI signal information.

Photo: Best setting for JPEG viewing.

Graphics: Best setting for On-Screen display of connected equipment.

How to Use Menu Functions

Advanced

53