Network settings
This is a setting for connecting to a broadband environment.
Display the menu
Select “Network settings”
Menu | Setup | 1/2 |
| select |
|
3D settings Channel surf mode
All
Language
Clock
ANT/Cable setup
Input labels
Anti image retention
■Press to exit from |
|
| Network settings |
|
|
| |
a menu screen |
|
|
|
|
|
|
■Press to go back to the previous screen
Select the settings and set
|
|
|
|
|
|
| select | |
Menu | Network settings |
|
|
| ||||
|
| |||||||
|
|
| Connection test |
|
|
| adjust | |
|
|
|
|
|
| |||
|
|
| Network connection | Wireless (WiFi) |
|
|
| |
|
|
| Wireless network |
|
|
|
| |
|
|
| IP address/DNS settings |
|
|
|
| |
|
|
|
|
|
|
| ||
|
|
| Network link |
|
|
|
|
|
|
|
| Network cameras list |
|
|
|
| |
|
|
| Software update |
|
|
|
| |
|
|
| Mac address |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connection test
Check that the Network settings are as shown below, and then start “Connection test”.
Select “Connection test” and press OK
(It takes a while to cancel the test.)
Displayed Connection test screen
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Test in progress...
Complete Connection test
Network connection
Select Network type (Ethernet cable/Wireless (WiFi))
Wireless network (Confirm Current settings and status)
This setting is performed only when “Wireless (WiFi)” is selected in “Network connection” above.
■Displayed “Current settings and status” screen (If connected with Wireless LAN Adapter)
You can confirm the AP connection status.
(SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength)
Press “Wireless network”
Wireless network | select |
SSID : |
|
Wireless type : |
|
Security type: | OK |
Encryption type : | |
Connection status : |
|
Signal strength : |
|
Connect using these settings? |
|
YesNo
When you change “Wireless network” -->Press “No”
See “Sets / Changes wireless network setting” on p. 43 and follow the directions on screen to complete the setting.
You need to be “Connected” to use network devices. Please set Access point settings to “Connected”.
42
(example)
