![](/images/new-backgrounds/1307404/30740435x1.webp)
Initial selections
Selecting the input signal
Select the input signals to be connected by installing the optional Terminal Boards.
INPUT
Press to select the input signal to be played back from the equipment which has been connected to the LCD Display.
Input signals will change as follows:
INPUT1 INPUT2 PC IN
|
|
| INPUT | |
| SURROUND |
|
| |
|
|
| VOL |
|
N |
|
|
| R |
PICTURE | SOUND | SET UP | ||
MULTI |
|
|
| ZOOM |
PIP | SWAP | SELECT | MOVE |
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
•Input terminal will not be selected if the terminal board is not installed into the SLOT.
•Select to match the signals from the source connected to the component/RGB input terminals. (see page 29)
•In 2 screen display, the same input mode cannot be selected for the main picture and
sub picture. | INPUT MENU |
Selecting the On-Screen Menu Language
SET UP
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
.......(Chinese)
![](/images/new-backgrounds/1307404/30740435xi5.webp)
.......(Japanese)
|
|
| INPUT |
| SURROUND |
|
|
|
| VOL | |
N |
|
| R |
PICTURE | SOUND | SET UP | |
MULTI |
|
| ZOOM |
PIP | SWAP SELECT | MOVE | |
SET UP |
|
| 1/2 |
SIGNAL
| RGB |
|
|
|
|
INPUT LABEL | PC |
|
|
|
|
POWER SAVE | OFF |
|
|
|
|
STANDBY SAVE | OFF |
|
|
|
|
POWER MANAGEMENT | OFF |
|
|
|
|
AUTO POWER OFF | OFF |
|
|
|
|
OSD LANGUAGE | ENGLISH (US) |
18