1/2
Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Enable
On
Off
0
Off
Off
0
39
Options Adjustments
Press or button to switch between
modes.
Off PC INPUT1 INPUT2
INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed.
(see page 13).
• Signal can be displayed when the
Terminal board is installed.
• Input switch can be used when this is
set to “Off”.
• In two screen display mode, if anything
other than “Off” is set, the value will be
fi xed as the value input in the single
screen display mode.
Press or button to switch between modes.
On Off
On
Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
was pressed.
Off
Hides all the items above from view.
Press or button to switch between modes.
Off PC INPUT1 INPUT2 INPUT3
Adjusts the input signal when TV is turned on.
Notes:
• Only the adjusted signal is displayed.
(see page 13).
• Signal can be displayed when the Terminal board
is installed.
• This menu is available only when “INPUT lock” is
“Off”.
Press button to adjust the volume when TV is
turned on.
Off On
Off
Sets normal volume.
On
Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume
can only be adjusted between 0 and your maximum
range.
• You can hear the changed volume regardless of
your volume setting before opening the options
menu if you adjust the volume when “Initial VOL
level” is “On” and cursor is on the menu.
Press button to adjust the maximum volume.
Off On
Off
Sets auto maximum volume.
On
Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than
the “Initial VOL level”, the “Initial VOL level”
automatically becomes the same as the “Maximum
VOL level”.
• The volume display can go up to 63 regardless of
the settings.
• You can hear the changed volume regardless of
your volume setting before opening the options
menu if you adjust the volume when “Maximum
VOL level” is “On” and cursor is on the menu.
Press or button to switch between
modes.
Off On
Off
Nullify all the settings adjusted.
On
Sets the colour temperature for TV
studio.
Note:
Valid only when the low is set as colour
temperature on screen adjustment.