8
D

Preventing the plasma television from falling over

Accessories/Options

For 42'' Plasma television

Accessories for pedestal security
1 Band (1) 2 Screw (3) 3 Wood screw (1) 4 Clamp (2)
Nominal diameter
4 mm x 10
ŶSecuring to a base ŶSecuring to a wall
screw 2
Band 1
Wood screw 3
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
Wall
Clamp 4
screw 2
* Use strong wire or chain which is commercially
available to secure the plasma television to a
solid area of the wall or a pillar.
* The plasma TV must be fastened to both the base and the wall.
Fasten with wood screws in the holes in the back
edge of the wood worktop. If there are no holes,
first drill them in the middle of the thickness of the
wood worktop, and then fasten the strap with wood
screws.
Screws on main body
* Remove the screws at both
top corners on the rear side of
the plasma TV, and attach the
clamps 4 to the plasma TV
using the removed screws.
* Use strong wire or chain which
is commercially available to
secure the plasma television
to a solid area of the wall or a
pillar.
Wood
Worktop
Front
Accessories for pedestal security
ŶSecuring to a base ŶSecuring to a wall

For 50'' Plasma television

D
Band
Screw
Wood Screw
Clamp
Clamp
1 Band (2) 2 Screw (2) 3 Wood screw (2) 4 Clamp (2)
Nominal diameter
4 mm x 12
• Securing method