EZ SyncTM Connections
Follow the connection diagrams below for HDAVI control of |
| If connection (or setting) of equipment compatible with HDAVI |
a single AV piece of equipment such as a Panasonic DIGA- |
| control is changed, switch the power of this unit Off then On |
DVD recorder, RAM theater, or Player theater system. |
| again while the power of all equipment is On (so that the |
Refer to page |
| unit can correctly recognize the connected equipment) and |
control information. |
| check that DIGA, RAM theater, and Player theater playback |
Optional HDMI and/or optical cables are not provided. |
| operate. |
Note
•HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode to HDMI 2 (p. 24) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p.
■Connecting this unit to the DIGA, RAM theater, or Player
theater
•For DIGA: Connect with HDMI cable
•For RAM theater and Player theater: Connect with the HDMI and audio cables.
If audio cable is not connected, you cannot listen to the TV program through the theater system.
■Connecting this unit to a DVD recorder and AV amp
When using an “EZ Sync”
Digital Audio out
Back of the TV
VIDEO |
|
|
|
|
|
|
|
|
|
|
| S | VIDEO |
| |||
PB |
| PB |
|
|
|
|
| VIDEO |
| ||||||||
|
|
|
|
|
|
|
|
|
|
| |||||||
|
| PR |
|
| PR |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| L |
| L L | L | L |
|
| |||||||||
AUDIO | R |
| R R | R | R | AUDIO |
| ||||||||||
|
| COMPONENT VIDEO |
|
|
| TO AUDIO AMP |
|
| |||||||||
|
|
|
|
|
|
|
|
|
| ||||||||
|
| INPUT |
|
| INPUT INPUT | PROG OUT |
|
| |||||||||
|
| 1 |
| 2 | 1 |
| 2 |
|
|
|
|
| |||||
DIGITAL
AUDIO
OUT
1 AV IN | 2 |
or
2 IN
Recommended AV Connections
or 
or
|
|
|
|
| HDMI cable |
AUDIO | HDMI | HDMI | HDMI | HDMI | HDMI |
(AV OUT) | |||||
IN | (AV OUT) | (AV OUT) |
| (AV OUT) | (AV IN) |
or |
Panasonic RAM theater / | DIGA | Panasonic | Panasonic AV amp | DIGA |
Panasonic Player theater | (Panasonic DVD Recorder) | HD Camcorder |
| (Panasonic DVD Recorder) |
•One AV amp and one DIGA recorder can be operated with this unit.
•Be sure to connect the AV amp between this unit and the DIGA recorder.
■Setting of this unit after connection
After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) to “On” using the Setup menu. (p.
Note
•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
•When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
Advanced
41
