Operating Peripheral Equipment
You can operate other manufacturers’ equipment using this TV’s remote control.
1 | Connect the external equipment to the TV and | |
Power Off the external equipment | ||
2 |
| Press both buttons simultaneously for |
+ | more than 3 seconds. | |
•Release the buttons when the equipment selection buttons start flashing.
3 
4 
5 
■Press to return to the TV mode
Select the equipment
with the equipment selection button
•The selected button remains lit (other buttons are not lit).
Input the equipment’s
Operate the equipment with the remote control (p. 42)
•The external equipment turns On.
■If the equipment does not operate with the remote control
•When your equipment has a single code
Input the remote control code again
•When your equipment has multiple codes
Change the code with 
above and test again
Caution
•Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
To find a code not listed in the code list
This procedure searches all codes and is called the “sequence method.”
After step 
above, change the code and test
change
Operate the equipment with the remote control (p. 42)
•Repeat until the code is found
•It may take many attempts before the correct code is found
When the correct code is found
store
Operating Peripheral Equipment Using Timer
Advanced
39
