VIERA LinkTM Connections
Follow the connection diagrams below for HDAVI control |
| If connection (or setting) of equipment compatible with |
of a single piece of AV equipment such as a DVD recorder |
| HDAVI control is changed, switch the power of this unit Off |
(DIGA), RAM theater, or Player theater system. |
| and On again while the power of all equipment is On (so that |
Refer to page |
| the unit can correctly recognize the connected equipment) |
control information. |
| and check that the DVD recorder (DIGA), RAM theater, and |
• Optional HDMI and/or optical cables are not included. |
| Player theater playback operate. |
Note
HDMI 1 is recommended.
When connecting to HDMI 2/HDMI 3, set the input mode to HDMI 2/HDMI 3 (p. 22) initially before connecting to | |
HDMI 2/HDMI 3. After connection, confirm the HDMI control functions (p. | |
■Connecting this unit to the DVD recorder (DIGA), RAM | ■Connecting this unit to a DVD |
theater, or Player theater | recorder (DIGA) AV amp |
For DVD recorder (DIGA): Connect with HDMI cable | When using an “VIERA Link” audio- |
For RAM theater and Player theater: | video amplifier and a compatible DVD |
Connect with the HDMI and audio cables. | recorder (DIGA) use a daisy chain |
If audio cable is not connected, you cannot listen to the TV program | connection as shown below. |
through the theater system. |
|
Digital Audio out |
|
Back of the TV
or
Recommended AV Connections
oror
|
|
|
|
| HDMI cable |
AUDIO | HDMI | HDMI | HDMI | HDMI | HDMI |
IN | (AV OUT) | (AV OUT) | (AV OUT) | (AV OUT) | (AV IN) |
or |
RAM theater / | HD Camcorder | DVD recorder (DIGA) | AV amp with VIERA | DVD recorder (DIGA) |
Player theater with | with VIERA Link | with VIERA Link function | Link function | with VIERA Link function |
VIERA Link function | function |
|
|
|
One AV amp and one DVD recorder (DIGA) can be operated with this unit.
Be sure to connect the AV amp between this unit and the DVD recorder (DIGA).
■Setting of this unit after connection
After making connections as shown above, set “VIERA Link” (under “VIERA Link setting”) to “On” using the Setup menu. (p. 23,
Note
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
About HDMI cable for connecting Panasonic HD camcorder, read the manual of the equipment.
Advanced
41
