Panasonic TH-58PH10UK, TH-37PH10UK manual Reduces power consumption, Customizing the Input labels

Reduces power consumption

• POWER SAVE:	When this function is turned ON, luminous level of the Plasma Display is suppressed, so
	power consumption is reduced.
• STANDBY SAVE:	When this function is turned ON, power consumption of the microcomputer is reduced
	during power supply standby (see page 13-15), so standby power of the set is reduced.
• POWER MANAGEMENT:	The unit power supply is turned ON or OFF depending on whether or not there is a signal
	during PC input mode.
	This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub)
	terminal)
• AUTO POWER OFF:	Equipment power supply is turned OFF when there is no signal.
	When this is set to On, the power supply of the unit goes Off 10 minutes after the input
	signals stop.
	This function is effective for input signals except input from PC (Mini D-sub) terminal.

1

2

Press to select

“POWER SAVE”

“STANDBY SAVE” “POWER MANAGEMENT” “AUTO POWER OFF”.

Press to select “ON” or “OFF”.

On Off

Note:

SET UP	1/2
SIGNAL
COMPONENT/RGB-IN SELECT
	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

3

“POWER MANAGEMENT” and “AUTO POWER OFF” are Press to exit from SET UP. effective during normal viewing (one picture screen) only.

Customizing the Input labels
This function can change the label of the Input signal to be displayed.
		SET UP	1/2
Select the input signal which you would like to change its label before customizing
the Input labels. (see page 15, 18)
		SIGNAL
	Press to select INPUT LABEL.
COMPONENT/RGB-IN SELECT
				RGB
	Press to change the INPUT LABEL.	INPUT LABEL		PC
POWER SAVE			OFF
		STANDBY SAVE		OFF
		POWER MANAGEMENT		OFF
		AUTO POWER OFF		OFF
Notes:		OSD LANGUAGE	ENGLISH (US)

•While selecting a Input signal through Optional Terminal Board connected to Slot 1, Slot 2 and Slot 3, the Input label will depend on each Optional Terminal Board.

•Setting of SLOT3 is not available on TH-37PH10UK.

INPUT LABELS for Slot 1, Slot 2, Slot 3 and Mini D-sub:

[Slot1 Input]	INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1
[Slot2 Input]	INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2
[Slot3 Input]	INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3
[PC (Mini D-sub) input]	PC/COMPONENT/RGB/DVD/STB

When BNC Dual Video Terminal Board (TY-FB9BD) is used, an “A” or “B” is added at the end of each input label, depending on the input selected (see below).

Addition sign	“A”	“B”
Selected Input	Composite	S VIDEO

32