13
Connections

Speaker connection

1
2
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.

AC cord xing

Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet rst.

Using the clamper

Secure any excess cables with clamper as required.

Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.

AC cord connection and xing, cable xing

Attach the clamper To remove from the unit:
Keep
pushing both
side snaps
hole

Bundle the cables

snaps
hooks Set the
tip in the
hooks
To loosen:
Keep
pushing
the knob
knob
Insert the clamper
in a hole.
12
Red
Black
While pressing the lever,
insert the core wire.
Red
Black
Return the lever.
Note:
Please use 8 Ω/10 W speaker.