Panasonic TH-L32U30M Stereo / Bilingual Sound Selection, Media Player, Technical Information

Stereo / Bilingual Sound Selection

When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the Sound Selection button.

Audio Signal	STEREO		MAIN I	SUB II				MONO
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong, etc.
Type of	Regular broadcast	Regular +		NICAM		NICAM DUAL MONO
broadcast	(Standard Audio)	NICAM MONO I (MAIN I )		STEREO		(MAIN I / SUB II )
Mode Indicator	No Indicator						I		II
A2 (German) .......Used in Australia, Malaysia, etc.
Type of	Regular broadcast	BILINGUAL or DUAL MONO:			STEREO
broadcast	(Standard Audio)	MAIN I / SUB II
Mode Indicator	No Indicator

●If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching occurs, it is recommended you switch from STEREO to MONO.

●Even when the contents of the receiving signal undergo changes, selection mode is kept intact.

●When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the Sound Selection button.

●DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.

Media Player

SD Card

Card format : SDXC Card - exFAT SDHC Card / SD Card - FAT16 or FAT32

Compliant card type (maximum capacity) : SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring miniSD adaptor)

Su

■

J

∗1:

∗2:

■

C

S

A

A

Technical Information

●If miniSD Card is used, insert / remove it together with the adapter.

●Check the latest information on the card type at the following website. (English only)

http://panasonic.jp/support/global/cs/tv/ ●Use an SD Card which meets SD standards. If not, it may cause the TV

to malfunction. ●Do not remove the card while the TV is accessing data (this can damage 32 mm

the card or TV).

●Do not touch the pins on the back of the card.

●Do not subject the card to high pressure or impact.

●Insert the card in the correct direction (otherwise, card may be damaged).

●Electrical interference, static electricity, or erroneous operation may damage the data or card.

●Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.)

USB Flash Memory

Format : FAT16, FAT32 or exFAT

On-screen messages

2.1 mm

24 mm

M

A

M

M

Message	Meaning / Action
Cannot read file	●The file is broken or unreadable.
	●The TV does not support the format.
No Device Inserted	●Confirm SD Card or USB device is inserted correctly.
No valid file to play	●The card has no data.
This operation is not possible	●Your operation is not available.

64

T

TH_L32U30KMTX_EN.indd 64

3/21/2011 3:06:29 PM