Accessories / Options
Identifying Controls
Quick Start
Guide
9
Identifying Controls
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has received a
command.
Remote control signal receiver
Do not place any objects between the TV remote control
signal receiver and remote control.
●
●
●
TV
C.A.T.S. (Contrast Automatic
Tracking System) sensor
Senses brightness to adjust
picture quality in “Eco Mode” in
Picture Menu (p. 24)
●
Mains power On / Off switch
Switch On to turn on the TV●
Function Select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / “Digital TV Auto
Tuning” or “Analogue TV Auto Tuning”
(p. 24 - 25)
●
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Change the input mode
15° 399 mm
296 mm
15°
Set the mark at the centre as illustrated,
to have the swivel positioned at the
centre of the rotation angle.
(View from the top)
Adjust the LCD panel to your desired angle
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
●
●
S VIDEO
AV3 terminals
Headphone
jack
HDMI3
terminal
SD card slot