Advanced settings

MPX

Selects multiplex sound mode (if available).

Stereo:

Use this normally.

Mono:

When stereo signal cannot be received

M1 / M2:

Available while mono signal is transmitted. ●● For Analogue TV

When you receive the stereo / bilingual sound system, sound output modes can be selected by using the MPX in the Sound Menu.

●● Meanings of mode indicators

: STEREO

: MAIN I

: SUB II : MONO

■■Available mode indicator for each type of broadcast

●● NICAM - Used in New Zealand, Singapore, Hong Kong, etc.

–Regular broadcast (Standard Audio): No indicator /

–Regular + NICAM MONO I (MAIN I): /

–NICAM STEREO: /

–NICAM DUAL MONO (MAIN I / SUB II): / /

●● A2 (German) - Used in Australia, Malaysia, etc.

–Regular broadcast (Standard Audio): No Indicator /

–BILINGUAL or DUAL MONO (MAIN I / SUB II): /

–STEREO: /

=Note =

●● If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching occurs, it is recommended to switch from STEREO to MONO.

●● Even when the contents of the receiving signal undergo changes, selection mode is kept intact.

- 181 -