Technical Information
45
Technical
When you receive the stereo / bilingual sound system, sound output modes can be selected by
pressing the Stereo / Bilingual Sound Selection button.
Audio Signal STEREO MAIN
I
SUB
II
MONO
Mode Indicator
I II
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast Regular broadcast
(Standard Audio)
Regular + NICAM MONO
I
(MAIN
I
) NICAM STEREO NICAM DUAL MONO
(MAIN
I
/ SUB
II
)
Mode Indicator No Indicator
I I II
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN
I
/ SUB
II
STEREO
Mode Indicator No Indicator
I II
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO
●
automatic switching occurs, it is recommended you switch from STEREO to MONO.
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
●
position, using the stereo / bilingual sound selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some
●
countries.
Stereo / Bilingual Sound Selection