Accessories / Options
9
3D Eyewear
(Battery type)
TY-EW3D10W
(Rechargeable
type)
TY-EW3D2SW
TY-EW3D2MW
TY-EW3D2LW
Product information (Model No. and release date etc.) is subject to change
without notice.
For more product information (English only)
http://panasonic.net/avc/viera/3d/asia.html
Communication
Camera
TY-CC10W
Caution
This camera can be used on VIERA Connect (p. 17).
Please also read the manual of the camera.
Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
Wall-hanging
bracket
TY-WK4P1RW
The angle of
wall-hanging
bracket can be
adjusted in “zero
tilting (vertical)”
and “5, 10, 15 or
20-degree tilting”
for this TV.
(View from the side)
Holes for wall-hanging
bracket installation
Depth of screw:
minimum 10 mm
maximum 16 mm
Screw Thread Type: M8
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
400 mm
300 mm
Rear of the TV
Warning
Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself
have the risk of personal injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets. Any damage caused by installing
without a qualified installer will void your warranty.
Carefully read the instructions accompanying optional accessories, and be
absolutely sure to take steps to prevent the TV from falling off.
Handle the TV carefully during installation since subjecting it to impact or other
forces may cause product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no
electrical cables or pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed wall position when it is no
longer in use.