Panasonic TH-P65VT30D, TH-P65VT30P, TH-P65VT30K Part names and functions, Using Precautions

Part names and functions

1 2 3 4

5

■Battery status shown by indicator lamp

1Infra-red receiver

Receives infra-red signals from the television. The liquid crystal shutter open/close timing is controlled by receiving infrared signals from the television, which provide 3D expression of the images.

If the eyewear stops receiving infra-red signal from the television, the power automatically switches off after 5 minutes.

2Liquid Crystal Shutter (Lens) Controls the images for 3D viewing.

The left and right liquid crystal shutters are alternately opened and closed in time with the left side and right side images that are alternately displayed on the television to achieve the 3D effect.

3Power switch (bottom side of 3D Eyewear) Switches on the 3D Eyewear power.

The 3D Eyewear is turned on by setting the power switch to “ON”. Set the power switch to “OFF” to turn off the 3D Eyewear.

4Indicator lamp

Lights or flashes during use or charging to show the status of the rechargeable battery.

5Charging port

Connect the charging cable. (p. 28)

Viewing 3D images

Power/indicator lamp status	Battery status
Lights for 2 seconds when turned on	Sufficient battery level
Flashes 5 times when turned on	Low battery level
Flashes once every 2 seconds when in use	Operating normally
Lights continuously when off	Charging
Lamp off	Power off

Using Precautions

Liquid Crystal Shutter (Lens)

•Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the 3D Eyewear.

•Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc. Doing so may cause damage to the 3D Eyewear, and reduce the quality of the 3D image.

Infra-red receiver section

•Do not soil the infra-red receiver section or attach stickers etc. to it.

•Doing so may prevent the receiver from receiving signals from the television, which may prevent the 3D Eyewear from operating normally.

•If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images may not be displayed correctly.

Cautions during viewing

•Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal transceivers) near the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction.

•The 3D Eyewear cannot operate fully at high or low temperatures.

Please use within the specified usage temperature range. (p. 88)

•If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within the room may appear to be flickering. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear.

•Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.

•Other kinds of displays (such as computer screens, digital clocks, or calculators etc.) may be difficult to see while wearing the 3D Eyewear. Do not wear the 3D Eyewear when watching anything other than 3D images.

27