54
4. To stop the screen saver, press the R button on the
remote control.
Side Bar Brightness adjustment
This feature allows the customer to adjust the
brightness of the non-picture area on either side
of the 4:3 image on screen.
1. Press the Setup button on the remote control.
2. Use the Up/Down arrow buttons to highlight Side bar adjust, then press
the action button.
3. Use the Left/Right Arrow buttons to select the desired setting, Off → Dark
→ Mid → Bright.
Note: Setting the side bar to Bright may cause a flashing effect depending on
the image being displayed. Also Bright sidebars may cause an after image.
4. Press the R button on the remote control to exit this
menu.
Figure 50
Figure 51
Figure 52
Figure 54 Figure 53
Figure 55