Operating peripheral equipment
Programming the remote control code
You can operate other manufacturers’ components using this TV’s remote control.
Preparations:
•Connect the power cord of the external component to the wall outlet.
•Make sure the component is turned off.
1 | CH |
POWER |
|
+ | |
POWER |
|
SAP | CH |
|
Press and hold POWER and OK together, for at least 5 seconds.
•The mode selection buttons flashes, and then release POWER and OK.
LIGHT
TV VCR DVD
DTV RCVR DBS/CBL AUX
TV/VIDEO SLEEP EXIT
|
|
| CT | FA |
|
|
|
| E | VO | RI |
| |
| P |
|
|
| ||
S |
|
|
| T | ||
A |
|
|
|
|
| E |
|
| E |
| R |
|
|
| C | |
| U | T |
| E |
M |
| A | ||
| CH | L | ||
|
|
|
| L |
-VOL OK VOL+
MENU CH RETURN
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
0 | PROG | |
|
| |
REW | PLAY | FF |
PAUSE | STOP | REC |
TV/VCR | DVD/VCR CH | OPEN/CLOSE |
TV
2 | VCR | DVD | Select the type of the component. |
|
| • The selected button lights and all others go out. | |
| DTV RCVR | DBS/CBL | AUX |
3 | 1 | 2 | 3 | Enter the | |
4 | 5 | 6 | • Factory default setting : Panasonic | ||
| |||||
| • Press POWER to test the operation. | ||||
| 7 | 8 | 9 | ||
|
| ||||
|
| 0 |
|
|
Notes:
•If the component does not operate with the remote control, repeat the procedure using another code. (Some brands have multiple codes.)
•If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.
| To find a code not listed in the index | |
|
| |
1 | After selecting the type of component (step 2, above) | |
| CH | Press to select the code. |
|
| |
| • The code starts from the current device. | |
| CH | • Press POWER button to test the operation. |
•Repeat the steps until the component code is found. It may take many attempts before the correct code is found.
2 
Press to store the code.
CH
-VOL OK VOL+
CH
39
