Panasonic TH 50VX100U Reduces screen image retention, Screensaver For preventing image retention

SCREENSAVER (For preventing image retention)

Reduces screen image retention

These functions prevent the occurrence of an “image retention” on the display when turned ON.

WOBBLING: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image.

ON1: Shifts the image every 30 seconds.

ON2: Shifts the image at a dot level pitch depending on screen-detection.

PEAK LIMIT: Suppresses image contrast (peak brightness).

Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 45)

1

2

Select “WOBBLING” or “PEAK LIMIT”.

Select “ON1”, “ON2” or “OFF”
	SCREENSAVER
(WOBBLING).
	START		2 change
Select “ON” or “OFF” (PEAK	FUNCTION
		NEGATIVE IMAGE	1	select
LIMIT).
	SIDE BAR ADJUST	BRIGHT
	WOBBLING	OFF
	PEAK LIMIT	OFF

SIDE BAR ADJUST

Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display field.

To reduce the risk of such an image retention, illuminate the side bars.

This function may be applicable to the non-picture area.

1	Select “SIDE BAR ADJUST”.
2	Adjust the menu.

Side bars

4:3 mode

Image

retention

SCREENSAVER			2	change
START
FUNCTION	NEGATIVE IMAGE		1	select
SIDE BAR ADJUST	BRIGHT
WOBBLING	OFF	OFF	DARK		MID	BRIGHT
PEAK LIMIT	OFF

3 Exit from SCREENSAVER.

or

Notes:

•To reduce the occurrence of image retention, set the “SIDE BAR ADJUST” to “BRIGHT”.

•The side bar may flash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode will reduce such flashing.

35