Panasonic TH 50PZ700U, TH 58PZ700U Advanced, Recommended AV Connections, EZ SyncTM Connections

EZ SyncTM Connections

Follow the connection diagrams below for HDAVI control of	If connection (or setting) of equipment compatible with HDAVI
a single AV piece of equipment such as a Panasonic DIGA-	control is changed, switch the power of this unit Off then On
DVD recorder, RAM theater, or Player theater system.	again while the power of all equipment is On (so that the
Refer to page 32-33 for Setup Menu settings and additional	unit can correctly recognize the connected equipment) and
control information.	check that DIGA, RAM theater, and Player theater playback
Optional HDMI and/or optical cables are not provided.	operate.

Note

•HDMI 1 is recommended.

When connecting to HDMI 2, set the input mode to HDMI 2 (p. 24) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p. 32-33).

■Connecting this unit to the DIGA, RAM theater, or Player

theater

•For DIGA: Connect with HDMI cable

•For RAM theater and Player theater: Connect with the HDMI and audio cables.

If audio cable is not connected, you cannot listen to the TV program through the theater system.

Digital Audio out

■Connecting this unit to a DVD recorder and AV amp

When using an “EZ Sync” audio-video amplifier and a compatible DIGA recorder, use a daisy chain connection as shown below.

	VIDEO						S	VIDEO
		PB		PB			VIDEO
		PR		PR
		L		L L		L	L
Back of the TV	AUDIO	R		R R		R	TO AUDIO AMP	AUDIO
							R
		COMPONENT VIDEO
		INPUT			INPUT INPUT		PROG OUT
		1	2	1		2

	or	or
AUDIO	HDMI	HDMI
IN	(AV OUT)	(AV OUT)

DIGITAL

AUDIO

OUT

AUDIO

IN

PC

2 IN

HDMI (AV OUT)

1 AV IN 2

or

	HDMI cable
HDMI	HDMI
(AV OUT)	(AV IN)

Recommended AV Connections

Advanced

or

Panasonic RAM theater /	DIGA	Panasonic	Panasonic AV amp	DIGA
Panasonic Player theater	(Panasonic DVD Recorder)	HD Camcorder		(Panasonic DVD Recorder)

•One AV amp and one DIGA recorder can be operated with this unit.

•Be sure to connect the AV amp between this unit and the DIGA recorder.

■Setting of this unit after connection

After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) to “On” using the Setup menu. (p. 32-33).

Note

•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.

•When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.

(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)

43