Operating Instruction Book
TU-HDT105A
There are several methods to change or select a channel. You can either use the
front panel or the remote control buttons.
The following methods are available for you to choose from:
Press Channel on the remote control (channel changes according to favourite
channel settings).
Directly enter a logical channel by using the number keys on the remote control.
Broadcasters have allocated logical channel numbers (LCN) to their services based
on their service number identity. The programs can be selected by the LCN.
1: TEN,
2: ABC,
3: SBS
5: TEN Regionals,
6: SEVEN Regionals,
7: SEVEN,
8: NINE Regionals,
9: NINE
Use to change channel. Unlike Channel control channel movement is not
aligned with favourite channels setting.
Use to toggle between current channel and previously watched
channel.
5.4 Audio Mode Selection
Australian broadcasters transmit MPEG and/or
Dolby Digital audio with all programs. The audio
mode default setting is MPEG. This can be
changed by pressing the audio button AUDIO on
the remote control to change between the
available sound types. When you first press the
button, the Audio OSD is shown on screen l
all available soundtracks. The currently played
track is highlighted. This OSD will disappe
few seconds. Press the Audio key again to select
another track before this OSD disappears.
isting
ar in a
13