To check memory left, To stop | Panasonic TX-32LXD600A instruction

Recording a Programme on SD Card

The TV channels can be recorded on the SD card. The recording is not available for AV input signal. During recording, it is possible to watch other terminals input signal.

SD REC	1	Insert the SD Card (p. 29)
	1

	2	While watching a programme
		SD REC	Recordable time is displayed
EXIT			•if the recording time is not set (p. 31).
			•	Start recording
			•		EXIT
			•Cancel

■Should such a message appear

To set the recording time and mode / To format the card

Select the SD mode				Set
				Setup		set
				Rec mode	Economy
				Rec time	No setting
				Card format	Access
						select
Select "Setup"			access
SD card			access
	MPEG4 view		select
	Photo view		select
	Setup
	Memory left




Menu		Item	Adjustments /
Menu		Item	Adjustments /		Conﬁgurations
			Select image quality
			(Extra ﬁne / Super ﬁne / Fine / Normal / Economy)

•Recording

1 2 3

4 5 6

7 8 9

Start recording?

Not enough memory

Current setting
Rec time	180min
Rec mode	Economy
Recordable at	15min

Card capacity is not enough.

•Continue (Recording is stopped when the card capacity is full.)

• EXIT

Cancel

		The quality of audio is not changed.
	Rec mode	•Multi Media Cards do not support the Extra ﬁne and Super ﬁne recording
Setup		•mode. If the recording is started in these status, recording will automatically
		be performed in the Fine mode.

menu	Rec time	Select recording time (No setting / 5 / 10 / 15 / 30 / 60 / 90 / 120 / 180min)
	Rec time	•No setting : Recorded until the Card capacity is full
		•No setting : Recorded until the Card capacity is full
		Format the card inserted in the SD Card slot (all data is erased)

	Card format	•Do not remove the SD card while formatting. That may cause the card not to

a Programme

IDTV

To stop

3 SD REC

(During the conﬁrmation message appears)

Note

•You cannot record the copy protected signals.

•If the Off timer function is activated or press the Standby On / Off button on the remote control during recording, the recording will not stop.

•Do not press the On / Off switch on the TV during recording. Otherwise the ﬁle will be broken.

•Do not remove the SD card while recording. The data being recorded and other data stored on the SD card may become unreadable.

•SDPDArecordingdevices. may not be fully compatible or playable in some PC software or

•When two pictures are shown on the same screen as Multi window functions, the main window is the one that is recorded. (p. 10)

•Ifcompletely.the signal system is changed during recording, it cannot be recorded

•The signals without video (only audio) cannot be recorded completely.

be able to record properly.