Picture Adjustment
C. TEMP | Set the overall colour tone of the picture. | ||
(Colour Temperature) |
|
|
|
| Press to switch between modes |
| |
| STANDARD | WARM | COOL |
PICTURE
MENU CONTRAST BRIGHTNESS COLOUR SHARPNESS
STANDARD
STANDARD
(Picture Noise Reduction)
AI
Automatically reduces undesired picture noise.
Press to switch between modes
OFF STRONG
AUTO WEAK
TC-43P250H, TC-51P250H: Switching is also
D.PNR
possible using 
on the remote control.
Automatically analyses the incoming picture and processes it to give improved contrast and optimum depth of field.
possible using P. AI on the remote control.
PICTURE
SCAN MODE
PICTURE
SCAN MODE
AUTO
ON AUTO
AUTO
ON
AUTO
SCAN MODE | Choose the screen refresh method: | ||
| Press to switch between modes | ||
| AUTO | 100 Hz MODE | PROGRESSIVE |
PICTURE
SCAN MODE
AUTO ON
AUTO
MODE | Function |
AUTO | The TV software will select the best mode for the signal being viewed. |
|
|
100 Hz MODE | 100Hz will give a steady picture for most signal transmission. |
|
|
PROGRESSIVE | Recommended when receiving NTSC signals. |
|
|
100Hz/
Switching is also possible using PROGRE on the remote control.
Note:
We recommend that you set Scan mode to Progressive when viewing a PAL 60 or NTSC transmission. When viewing a PAL transmission (other than PAL 60) with Scan mode set to Progressive, the screen will flicker, this is not a fault.
Helpful Hint ( N Normalization)
By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
31
