Picture Adjustment
C. TEMP (Colour Temperature)
Set the overall colour tone of the picture.
Press to switch between modes
STANDARD WARM COOL
P-NR (Picture Noise Reduction)
Automatically reduces undesired picture noise.
Press to switch between modes
OFFSTRONG
AUTOWEAK
PICTURE
MENU CONTRAST BRIGHTNESS COLOUR SHARPNESS
PICTURE
AI
STANDARD
STANDARD
AUTO
ON
AI (Artificial intelligence)
Automatically analyses the incoming picture and processes it to give improved contrast and optimum depth of field.
ON 
OFF
SCAN MODE
When receiving PAL or SECAM Signal, SCAN MODE is displayed.
Choose the screen refresh method:
Press to switch between modes
100 Hz MODE 
PROGRESSIVE
PICTURE | AUTO | |
AI |
|
|
ON | ||
PICTURE |
|
AI | ON |
SCAN MODE | 100 Hz |
When receiving PAL or
SECAM Signal
MODE | Function |
100 Hz MODE | 100Hz will give a steady picture for most signal transmission. |
|
|
PROGRESSIVE | Avoids “snaking/jaggy” effect when viewing TV program with |
| moving characters. |
|
|
100Hz/
Switching is also possible using PROGRE on the remote control.
Note:
When viewing a PAL transmission (other than PAL 60) with Scan mode set to Progressive, the screen will flicker, this is not a fault.
Helpful Hint ( N Normalization)
By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
25
