Features
■LAN control function compatible
You can control the display connected to the network with a PC.
■ PJLink™ class 1 compatible
You can use the PJLink™ protocol to perform operations such as the following from a PC.
●Display setup
●Display status query
■Equipped with component/RGB input terminals
Connecting an external device allows you to watch component/RGB video.
■ Models
Safety Precautions
WARNING
●Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
●If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the unit.
Switch off the display and unplug the power cord plug from the supply outlet.
To avoid fire or shock, do not leave the power of the unit turned on.
●To avoid shock or other problems, do not leave the unit plugged into the supply outlet.
●Please contact our designated service department for installation or change of this product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn the power of the unit off and unplug the power cord plug from the supply outlet.
English
Handling Cautions
●Do not touch the connector contacts with hands directly.
To avoid electrostatic damage to internal parts, before handling this product, touch a large metallic object such as a steel cabinet to discharge yourself.
●Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.
Accessories
Please check and identify the supplied accessories. |
|
|
| ||
•Terminal function label (1 sheet) | • Screw | (× 4) | • Ferrite | core (× 2) | |
| (page 3) | (page 3) | (J0KG00000014) (page 5) | ||
|
|
|
|
|
|
|
|
|
|
|
|
Affix this label to the applicable slot of the rear panel of the unit.
Use the Ferrite cores to comply with the EMC standard.
2
