Network Setup
Make the various settings to use the network function.
SET UP | 2/2 |
MULTI DISPLAY SETUP |
|
MULTI PIP SETUP |
|
PORTRAIT SETUP |
|
SET UP TIMER |
|
PRESENT TIME SETUP |
|
NETWORK SETUP |
|
DISPLAY ORIENTATION | LANDSCAPE |
NETWORK SETUP
SAVE |
|
|
|
DHCP | OFF |
|
|
|
|
|
|
IP ADDRESS | 192.168. 0. | 8 |
|
|
|
|
|
SUBNET MASK | 255.255.255. | 0 |
|
|
|
|
|
GATEWAY | 192.168. 0. | 1 |
|
|
|
|
|
PORT | 1024 |
|
|
|
|
|
|
LAN SPEED | AUTO |
|
|
|
|
|
|
NETWORK ID | 0 |
|
|
|
|
|
|
CONTROL I/F SELECT |
|
| |
MAC ADDRESS |
| ||
DHCP, IP ADDRESS, SUBNET MASK, and GATEWAY settings
1 Set DHCP.
When “OFF” is selected, IP ADDRESS and other settings
can be set manually.
2 Select the item and press 
.
3 Enter an address.
| 1 | Use |
| to select a digit. |
IP ADDRESS |
|
|
|
|
I192.168. 0. 8 | 2 | Use |
| to change a number. |
|
| |||
| 3 | Press |
| . |
|
| |||
| Pressing |
| will cancel the address | |
| change. |
|
| |
4 Select “SAVE” and press 
.
PORT setting
1 Select “PORT” and press 
. 2 Enter a port number.
PORT |
| 1 | Use | to select a digit. |
|
|
|
| |
| I01024 | 2 | Use | to change a number. |
|
| |||
|
| 3 | Press | . |
English
SAVE
Save the current network Setup. Each value set for DHCP, IP address, Subnet mask, and Gateway will be saved. If “NG” is displayed, check the same IP address is not used within the same network.
DHCP (DHCP client function)
To obtain an IP address automatically using a DHCP server, set this to “ON”. If DHCP server is not used, set this to “OFF”.
IP ADDRESS (IP address display and setting)
Enter an IP address if DHCP server is not used.
SUBNET MASK (Subnet mask display and setting)
Enter a subnet mask if DHCP server is not used.
GATEWAY (Gateway address display and setting) Enter a gateway address if DHCP server is not used.
PORT
Set the port number used for command control. The available setting range is 1024 – 65535. When the PJLink™ protocol is used, the port setting is not necessary.
Pressing | will cancel the port |
number change.
LAN SPEED
Set the connection speed of the LAN environment. Select the value from AUTO, 10 HALF, 10 FULL, 100 HALF or 100 FULL.
NETWORK ID
Set the ID to identify this unit.
The available setting range is 0 – 99.
CONTROL I/F SELECT
Set whether to control with
MAC ADDRESS
Display the MAC address of this unit. However, the MAC address is not displayed when the “CONTROL I/F SELECT” is set to
4
Notes:
• To use a DHCP server, make sure the DHCP server is started.
• Contact your network administrator for details on settings.
