Relayed Transmission 
Sending a Document by Relayed Transmission
Once you have recorded all the necessary parameters in your machine in accordance with the Relay Network you belong to, you can send a document to two or more stations in the network system, automatically, using the procedure below.
1
Set document(s) face down.
2 FUNCTION 2
3 | Dial by any combination of the following methods: |
•Abbreviated Dialling |
•Directory Search Dialling, press SET after each station is entered
(For details, see page 46 to 49.)
ENTER STATION(S)
THEN PRESS START 00%
6
ENTER STATION(S)
THEN PRESS START
Ex: 01
<01>(Station name) 5551234
4
START
The document is stored into memory and your machine starts to dial the number of the Relay Station and sends the document.
After the Relay Station finishes its transmission to the End Receiving Stations, your machine prints out a RELAY XMT RESULT REPORT sent back by the Relay Station.
* STORE * | NO.001 |
PAGES=01 01%
Note: You cannot use manual number dialling in step 3.
135