93
LSQT0969
With other products
With a printer (PictBridge) (VDR-D200 only)
With a printer (PictBridge) (VDR-D200 only)(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
≥Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ USBFU NCTION] # [PictBridge] and press the
joystick.
≥Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
[ ] indication appears.
≥If the [ ] indication does not appear or
continues to flash, disconnect and then reconnect
the USB cable or check the printer, SD card and
settings on this unit.
≥Do not use any other USB cables except the
supplied one. (Operation is not guaranteed with any
other USB cables.)
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
4 Move the joystick up or down to select the desired number of prints,
then press the joystick.
≥You can set up to 9prints.
≥To cancel the setting, set the number of prints to [0].
≥Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.
AUSB cable (supplied)
≥Insert the plugs as far as they will go.
A
D200(P_PC)eng.book 93 ページ ２００５年１１月２２日 火曜日 午後３時１分