27
LSQT1319
Before using 6Inserting/removing an SD
card
Caution:
If the SD card is inserted or removed while the power is on, this unit may malfunction or the data
recorded on the SD card may be lost.
1Set the mode dial to OFF and
remove the battery.
Check that the status indicator has gone off.
2Open the SD card slot cover.
3Insert/remove the SD card.
Press the SD card straight in as far as it will go.
Press the center of the SD card and then pull it
straight out.
4Securely close the SD card slot
cover.
A
2

B1

ALabel side
SD card access lamp [ACCESS
CARD] B
When this unit is processing data, the lamp
lights up.
When lamp is on, do not:
sRemove the SD card
sOperate the mode dial
sRemove the battery or disconnect the
AC adaptor
Performing the above while lamp is on may
result in damage to data/SD card or this
unit.
VDR-D50P&PC-LSQT1319_eng.book 27 ページ 2007年11月14日 水曜日 午後5時21分