HOME menu displays

∑Setting mode display area

The displays appearing in this area indicate the modes which have been set.

CUT: Appears when the audio cut editing mode is set.

XFADE: Appears when the audio cross-fade editing mode is set.

VFADE: Appears when the audio V fade editing mode is set.

INTRP: Appears when the time code interpolation mode (in which the time code cannot be read out accurate- ly) is established.

DF:Appears when the drop frame mode is set.

F1/F2: Indicates the field numbers for VITC.

EMPHASIS: Appears when pre-emphasis is applied to the audio signals.

TRACK VAR: Appears when an adjustment has been made with the tracking deviated from the fixed position.

TRACK OPT: Appears when an optimizing adjustment has been made for the tracking.

∑Remaining tape time

This indicates the remaining tape time as the tape travels.

∑User file display

This indicates the number of file which is called when the power is switched on or the currently called user file. If there is a discrepancy between the contents of the user file displays and even one current setting, “¢” will appear in front of the file number.

∑Time code displays

These indicate the time code values.

CTL1: Normal control signal

CTL2: Control signal (which cannot be reset)

LTCR: LTC readout

LUBR: LTC user bit readout

VTCR: VITC readout

VUBR: VITC user bit readout

TCG: Value generated by generator

LUBG: Value of LTC user bit generated

VUBG: Value of VITC user bit generated

E-TC:External time code

E-UB:External user bit

∑Checking the value generated by generator

INPUT CHECK

Press the INPUT CHECK key. While the key is held down, the

 

 

value generated by the generator is displayed.

TCG

00 : 41 : 07 : 04

– 10 –