HOME menu
Key | Key designation |
|
| Description |
F1 | OUTPUT | The mode opposite to the current one is established only while | ||
| For selecting the | this key is held down. (When the key is pressed during TAPE | ||
| audio/video output signals. | setting, the EE mode is established.) | ||
|
| (If this key is pressed together with the F key, the display | ||
|
| switches.) | ||
|
| TAPE: Outputs playback signal. | ||
|
| EE: | Outputs the EE system signals. | |
|
| ≥Valid only in STOP, REC or EJECT mode. Invalid during | ||
|
| playback. | ||
|
| ≥This key does not operate during CUE signal output. | ||
|
|
| ||
F2 | FREEZE | Outputs field memory 1 screen continuously. | ||
| For outputtting the flash | Flash freeze frame is assumed only while this key is pressed. | ||
| freeze frame. | If this key is pressed together with the F key, the setting can be | ||
|
| fixed. |
|
|
|
| ON: Output field memory screens. | ||
|
| OFF: No | ||
F3 | EJT CTL | RESET: | Resets CTL1 when cassette is ejected. Resets CTL2 | |
| For CTL operation in |
|
| when cassette is loaded. |
| EJECT mode. | HOLD: | Holds CTL values for both CTL1 and CTL2 when | |
|
|
|
| cassette is ejected. |
|
|
|
| |
F4 | TC/CTL | TC: | Displays the time code. | |
| For timer mode switching. | CTL1: Displays the control signal value. (This can be reset to | ||
|
|
| zero.) | |
|
| CTL2: Automatically resets the control signal value to zero | ||
when the cassette tape is loaded. The control signal value cannot be reset after this.
F5 | TC/UB |
| For switching the display |
| between the TC and UB |
| values. |
TC: Displays the TC value.
UB: Displays the UB value.
≥Valid only when [TC] is selected with F4 key.
≥Displays the time code readout value during playback. ≥Displays the time code value recorded on tape during
recording.
≥To display values generated at times other than recording, press the INPUT CHECK key.
F6 | TC CLR | Valid only when the TC/CTL key is set to CTL1. |
| For clearing the TC value. | RESET: CTL1 time data is reset to zero. |
|
| Valid only when the TC/CTL key and the TC/UB key are set to TC. |
| (TCG CLR) | RESET: TCG value is reset to zero when F key is |
| For clearing the UBG | simultaneously pressed. |
| value. | Valid only when the TC/CTL key is set to TC and the TC/UB key |
|
| is set to UB. |
| (UB CLR) | RESET: UBG value is reset to zero when F key is |
| For clearing the UB value. | simultaneously pressed. |
|
| However, since there are two UBG values, VITC UBG and LTC |
|
| UBG, they are supported as follows by the TCR settings on the |
TC/CHR menu.
TCR: AUTO Both VITC UBG and LTC UBG are reset to zero.
TCR: LTC LTC UBG is reset to zero.
TCR: VITC VITC UBG is reset to zero.
F7 | TC HOLD |
| For holding the TC value |
| on the display. |
Continues to display the time code data which was displayed when the key was pressed.
≥Press again to release the hold value.
– 14 –