HOME menu displays
∑Setting the initial value for the time code
(1)Press the center cursor key.
The display now appears in reverse video.
Center cursor key
LTCR
00 : 00 : 00 : 00
(2)Press the center cursor key again so that the cursor is made to serve as a column cursor, and then use the number key to input the value.
1 | 0 | 0 | 0 | To set a letter from A to F in the initial value of the user bit, simul- | |
taneously press the F key and the corresponding number key | |||||
|
|
|
| ||
0 | 0 | 0 |
| (4 to 9). | |
| LUBR | ||||
|
|
|
| ||
F | 9 |
|
| 10 : 00 : 00 : 0F |
(3)Press the ENT key.
The cursor is now cleared. (This completes the setting of the initial value.)
≥To clear the value entered, press the C key in step (2).
≥To check the value which has been input, press the INPUT CHECK key.
– 11 –