TC/CHR menu
∑Changing the superimposing position
(1)Move the position using the cursor keys.
Center cursor key
Cursor keys 
≥When a cursor key is held down, the cursor will move more quickly.
≥When the center cursor key is pressed, the superimposing returns to its initial position.
∑Time code displays and VTR’s operating modes
Display the time codes and VTR’s operating modes as required.
Time code displays
CTL1: Control signal 1 | TCG: | Value generated by time code generator |
CTL2: Control signal 2 | LUBG: Value of LTC user bit generated | |
LTCR: LTC time code readout value | VUBG: Value of VITC user bit generated | |
LUBR: LTC user bit readout value | EXTC: External time code value | |
VTCR: VITC time code readout value | EXUB: External user bit value | |
VUBR: VITC user bit readout value |
|
|
≥The colon (“:”) between the seconds and frames denotes the readout mode of the time code reader.
Hours Minutes Seconds Frames
; ; ; ;
<Blinking display: Time code cannot be read out.
[ ]: First field
[. ]: Second field
[: ]: Time code can be read out or TCG value is displayed.
[ ]: Time code cannot be read out.
[. ]: DF mode ON
[: ]: DF mode OFF
This indicates that the time code is the original time code which was recorded on the tape. If the time code displayed is not accompanied by this cassette mark, it means that the time code is the
– 77 –