TC/CHR CONVERT menu

Key

Key designation

Description

F12

HD SUPER

For selecting the time code which is to be output to the HD

 

 

monitor connector.

 

 

24TC: The original time code with the frame count of 24 is

 

 

output.

 

 

30TC: The post-conversion time code with the frame count of

 

 

30 is output.

 

 

(25TC): The post-conversion time code with the frame count of

 

 

25 is output.

 

 

 

F13

LTC OUT°

For selecting the time code which is to be output to the LTC

 

 

output connector. (For details, refer to page 90.)

 

 

(25TC): This item appears only when the 25/50 Hz has been

 

 

selected as the system frequency.

 

 

30TC: The post-conversion time code with the frame count of

30 is output.

24TC: The time code with the frame count of 24 is output.

°This item appears only when the 1080/23p, 1080/24p, 1080/50p or 1080/50i system format is used. When 30TC is selected as the setting, the continuity of the time code is guaranteed only in the 1t tape travel servo lock status.

Bear in mind that the time code will be discontinuous at all other times.

When the audio insert editing status has been established by (RC_30SYS) key and 30TC for the F10 (RC_TC) key, RC 30SYS menu and MANUAL EDIT menu, as shown below.

selecting ON as the setting for the F6 will appear at the top right of the HOME

RC 30SYS

 

REC INH

F13

FREE

 

F12

8

F11

F10

F9

OUTPUT

FREEZE

EJT CTL

TC/CTL

TC/UB

TC CLR

TC HOLD

 

EE

OFF

RESET

TC

TC

RESET

HOLD

SETUP

F1

F2

F3

F4

F5

F6

F7

F8

∑Concerning the TC SYNC value and sync phase settings

Since the TC is similarly converted when the 1080/23psf (p) or 1080/24psf (p) format is converted into the 1080/59i (480/59i) or 1080/60i format, it is necessary to input the time information (TC SYNC value) that will serve as the reference for conversion and the 3:2 pull-down sequence (sync phase) of the post-conversion output images.

∑Setting the TC SYNC value

Input the pre-conversion TC with the frame count of 24 (24TC) and the post-conversion TC with the frame count of 30 (30TC)/25 (25TC) to serve as the reference for conversion.

ONoteN

When converting from 1080/25psf to 1080/23psf to 1080/59i (480/59i), or from 1080/25psf to 1080/24psf to 1080/60i

Input the pre-conversion 25-frame count TC (25TC) value that will serve as the reference during conversion and the post-conversion 24/30-frame count TC (24TC)/(30TC) value. SYNC PHASE is valid during the 24TC to 30TC conversion.

– 87 –