Panasonic VW-BN2PP manual ¬ Troubleshooting, Problem Check points

¬Troubleshooting

Problem	Check points
This unit cannot be	≥ Is the AC adaptor connected?
turned on.	>Connect the AC adaptor and the AC cable correctly. (P9)
This unit cannot be	≥ Disconnect the AC adaptor and then about 1 minute later
operated even when	connect it again. (Conducting the above operation when the
powered up.	access lamp is on may destroy the data on the disc.) If normal
This unit does not	conditions are not restored, detach from the connected power
	source and consult the dealer who you purchased this unit from.
operate normally.
	≥ The disc will not eject unless this unit is powered.
	>Connect the AC adaptor.
The [<] button does not	≥ The [<] button may not work when copying from a
	connected Camcorder to a disc is in progress.
work.	>Wait until the copying is finished.
	≥ In cases other than the above, detach from the connected
	power source and consult the dealer who you purchased this
	unit from.
The disc cannot be read.	≥ Is the disc scratched or dirty?
	>Wipe off the dirt on the disc. (P7) If the disc is scratched,
Copying stops.	insert a new one.
	≥ The internal temperature of this unit is high. Disconnect the AC
The playback motion	adaptor, wait a short while and then you will be able to use this
video/pictures breaks up	unit again.
for a moment.	≥ Discs recorded on other devices may not be correctly read or
	played back on this device.
	≥ Has the disc already been used for recording video and still
	pictures?
Cannot copy although	>If the disc contains recorded material, it cannot be used
power is supplied to this	again. Use a new disc.
unit and the disc is	>DVD-RAM, DVD-RW, +RW or CD-RW discs recorded with
correctly inserted.	any material can be reused after formatting the disc. Since all
	data previously recorded on the disc will be deleted, confirm
	contents of the disc carefully before reformatting it.

15

(ENG) LSQT1571